Technical requirements:

a. Processing product type: metal parts;

b. Size range: diameter (120-200) x height (25-30) mm. Weight: 0.4-0.7KG

c. There is no damage to the surface of the workpiece.

d. Silicone oil or seals are not allowed to be used in the equipment;

e. After cleaning, the surface of the workpiece should have no residual oil or water;

f. After cleaning, the surface of the workpiece must not be adhered with cutting dust or garbage;

Cleanliness requirement: Total pollution weight<1.0 mg/kg.

Main technical functions and parameters of the equipment:

1. Cleaning cycle: 35S/PCS,

2. Small equipment footprint: approximately L1350 * W2350 * H2700 (mm)

3. Automatic rotating spray system, automatic rotating wind cutting and drying system.

4. No product or cleaning liquid leakage or leakage;

5. No issues such as material jamming or product adhesion, 100% discharge of loaded products;

6. Set up visual windows at each workstation. Easy to observe work status;

7. The whole machine is easy to operate for use, maintenance, repair, and medium replacement;

8. The device display screen displays functions such as the number of cleaning parts.